"cmd" --- Support for line-oriented command interpreters
En esta página
"cmd" --- Support for line-oriented command interpreters#
Código fuente: Lib/cmd.py
======================================================================
La clase "Cmd" proporciona un framework simple para escribir intérpretes de comandos orientados a línea. A menudo son útiles para agentes de prueba, herramientas administrativas y prototipos que luego se incluirán en una interfaz más sofisticada.
class cmd.Cmd(completekey='tab', stdin=None, stdout=None)
Una instancia "Cmd" o subclase de la instancia es un framework intérprete orientado a líneas. No hay una buena razón para crear instancias "Cmd"; mas bien, es útil como una super clase de una clase intérprete que usted define con el fin de heredar métodos "Cmd" y encapsular métodos de acción.
El argumento opcional completekey es el nombre "readline" de una llave de finalización; por defecto es "Tab". Si completekey no es "None" y "readline" está disponible, el comando de finalización es hecho automáticamente.
The default, "'tab'", is treated specially, so that it refers to the "Tab" key on every "readline.backend". Specifically, if "readline.backend" is "editline", "Cmd" will use "'^I'" instead of "'tab'". Note that other values are not treated this way, and might only work with a specific backend.
Los argumentos opcionales stdin y stdout especifican la entrada y salida de los objetos archivo que la instancia Cmd o la instancia subclase usará para la entrada y salida. Si no está especificado, se predeterminarán a "sys.stdin" y "sys.stdout".
Si desea un stdin dado a ser usado, asegúrese de establecer las instancias atributo "use_rawinput" a "False", de lo contrario stdin será ignorado.
Distinto en la versión 3.13: "completekey='tab'" is replaced by "'^I'" for "editline".
Objetos Cmd#
Una instancia "Cmd" tiene los siguientes métodos:
Cmd.cmdloop(intro=None)
Emita repetidamente una solicitud, acepte la entrada, analice un prefijo inicial de la entrada recibida y envíe a los métodos de acción, pasándoles el resto de la línea como argumento.
El argumento opcional es un banner o cadena de caracteres introductoria que se tramitará antes del primer mensaje (esto anula el atributo de clase "intro").
Si el módulo "readline" es cargado, la entrada heredará automáticamente bash-como edición historia-lista (e.g. "Control"-"P" retorna al último comando, "Control"-"N" adelanta al siguiente, "Control"-"F" mueve el cursor a la derecha no destructivamente, "Control"-"B" mueve el cursor a la izquierda no destructivamente, etc.).
Un fin-de-archivo en la entrada es retornado como cadena de caracteres "’EOF’".
An interpreter instance will recognize a command name "foo" if and only if it has a method "do_foo()". As a special case, a line beginning with the character "'?'" is dispatched to the method "do_help()". As another special case, a line beginning with the character "'!'" is dispatched to the method "do_shell()" (if such a method is defined).
This method will return when the "postcmd()" method returns a true value. The stop argument to "postcmd()" is the return value from the command's corresponding "do_*()" method.
If completion is enabled, completing commands will be done automatically, and completing of commands args is done by calling "complete_foo()" with arguments text, line, begidx, and endidx. text is the string prefix we are attempting to match: all returned matches must begin with it. line is the current input line with leading whitespace removed, begidx and endidx are the beginning and ending indexes of the prefix text, which could be used to provide different completion depending upon which position the argument is in.
Cmd.do_help(arg)
All subclasses of "Cmd" inherit a predefined "do_help()". This method, called with an argument "'bar'", invokes the corresponding method "help_bar()", and if that is not present, prints the docstring of "do_bar()", if available. With no argument, "do_help()" lists all available help topics (that is, all commands with corresponding "help_*()" methods or commands that have docstrings), and also lists any undocumented commands.
Cmd.onecmd(str)
Interpret the argument as though it had been typed in response to the prompt. This may be overridden, but should not normally need to be; see the "precmd()" and "postcmd()" methods for useful execution hooks. The return value is a flag indicating whether interpretation of commands by the interpreter should stop. If there is a "do_()" method for the command str*, the return value of that method is returned, otherwise the return value from the "default()" method is returned.
Cmd.emptyline()
Método llamado cuando se ingresa una línea vacía en respuesta a la solicitud. Si este método no se anula, repite el último comando no vacío ingresado.
Cmd.default(line)
Método llamado en una línea de entrada cuando no se reconoce el prefijo del comando. Si este método no se anula, imprime un mensaje de error y retorna.
Cmd.completedefault(text, line, begidx, endidx)
Method called to complete an input line when no command-specific "complete_*()" method is available. By default, it returns an empty list.
Cmd.columnize(list, displaywidth=80)
Método llamado para mostrar una lista de cadenas de caracteres como un set compacto de columnas. Cada columna es tan amplia como sea necesaria. Las columnas se separan por dos espacios para facilidad de lectura.
Cmd.precmd(line)
Método de enlace ejecutado justo antes de que se interprete la línea de comando line, pero después de que se genere y emita la solicitud de entrada. Este método es un trozo en "Cmd"; existe para ser anulado por subclases. El valor de retorno es utilizado como el comando que se ejecutará mediante el método "onecmd()"; la implementación "precmd()" puede reescribir el comando o simplemente retornar line sin cambios.
Cmd.postcmd(stop, line)
Método de enlace ejecutado justo después de que finaliza un despacho de comando. Este método es un trozo en "Cmd"; existe para ser anulado por subclases. line es la línea de comando que se ejecutó, y stop es una bandera que indica si la ejecución finalizará después de la llamada a "postcmd()"; este será el valor de retorno del método "onecmd()". El valor de retorno de este método será usado como el nuevo valor para la bandera interna que corresponde a stop; retornando falso hará que la interpretación continúe.
Cmd.preloop()
Método de enlace ejecutado una vez cuando "cmdloop()" es llamado. Este método es un trozo en "Cmd"; existe para ser anulado por subclases.
Cmd.postloop()
Método de enlace ejecutado una vez cuando "cmdloop()" está a punto de retornar. Este método es un trozo en "Cmd"; existe para ser anulado por subclases.
Instancias de subclases "Cmd" tienen algunas variables de instancia públicas:
Cmd.prompt
El aviso emitido para solicitar entradas.
Cmd.identchars
La cadena de caracteres aceptada para el prefijo del comando.
Cmd.lastcmd
El último prefijo de comando no vacío visto.
Cmd.cmdqueue
Una lista de líneas de entrada puestas en cola. La lista cmdqueue es verificada en "cmdloop()" cuando una nueva entrada es necesitada; Si es no vacía, sus elementos serán procesados en orden, como si se ingresara en la solicitud.
Cmd.intro
Una cadena para emitir como introducción o banner. Puede ser anulado dando un argumento al método "cmdloop()".
Cmd.doc_header
El encabezado a tramitar si la salida de ayuda tiene una sección para comandos documentados.
Cmd.misc_header
The header to issue if the help output has a section for miscellaneous help topics (that is, there are "help_()" methods without corresponding "do_()" methods).
Cmd.undoc_header
The header to issue if the help output has a section for undocumented commands (that is, there are "do_()" methods without corresponding "help_()" methods).
Cmd.ruler
El carácter utilizado para dibujar líneas separadoras debajo de los encabezados mensajes-ayuda. Si está vacío, no se dibuja una línea regla. El valor predeterminado es "’=‘".
Cmd.use_rawinput
A flag, defaulting to true. If true, "cmdloop()" uses "input()" to display a prompt and read the next command; if false, "sys.stdout.write()" and "sys.stdin.readline()" are used. (This means that by importing "readline", on systems that support it, the interpreter will automatically support Emacs-like line editing and command-history keystrokes.)
Ejemplo Cmd#
The "cmd" module is mainly useful for building custom shells that let a user work with a program interactively.
Esta sección presenta un ejemplo simple de cómo construir un shell alrededor de algunos de los comandos en el módulo "turtle".
Basic turtle commands such as "forward()" are added to a "Cmd" subclass with method named "do_forward()". The argument is converted to a number and dispatched to the turtle module. The docstring is used in the help utility provided by the shell.
The example also includes a basic record and playback facility implemented with the "precmd()" method which is responsible for converting the input to lowercase and writing the commands to a file. The "do_playback()" method reads the file and adds the recorded commands to the "cmdqueue" for immediate playback:
import cmd, sys from turtle import *
class TurtleShell(cmd.Cmd): intro = 'Welcome to the turtle shell. Type help or ? to list commands.\n' prompt = '(turtle) ' file = None
# ----- basic turtle commands -----
def do_forward(self, arg):
'Move the turtle forward by the specified distance: FORWARD 10'
forward(*parse(arg))
def do_right(self, arg):
'Turn turtle right by given number of degrees: RIGHT 20'
right(*parse(arg))
def do_left(self, arg):
'Turn turtle left by given number of degrees: LEFT 90'
left(*parse(arg))
def do_goto(self, arg):
'Move turtle to an absolute position with changing orientation. GOTO 100 200'
goto(*parse(arg))
def do_home(self, arg):
'Return turtle to the home position: HOME'
home()
def do_circle(self, arg):
'Draw circle with given radius an options extent and steps: CIRCLE 50'
circle(*parse(arg))
def do_position(self, arg):
'Print the current turtle position: POSITION'
print('Current position is %d %d\n' % position())
def do_heading(self, arg):
'Print the current turtle heading in degrees: HEADING'
print('Current heading is %d\n' % (heading(),))
def do_color(self, arg):
'Set the color: COLOR BLUE'
color(arg.lower())
def do_undo(self, arg):
'Undo (repeatedly) the last turtle action(s): UNDO'
def do_reset(self, arg):
'Clear the screen and return turtle to center: RESET'
reset()
def do_bye(self, arg):
'Stop recording, close the turtle window, and exit: BYE'
print('Thank you for using Turtle')
self.close()
bye()
return True
# ----- record and playback -----
def do_record(self, arg):
'Save future commands to filename: RECORD rose.cmd'
self.file = open(arg, 'w')
def do_playback(self, arg):
'Playback commands from a file: PLAYBACK rose.cmd'
self.close()
with open(arg) as f:
self.cmdqueue.extend(f.read().splitlines())
def precmd(self, line):
line = line.lower()
if self.file and 'playback' not in line:
print(line, file=self.file)
return line
def close(self):
if self.file:
self.file.close()
self.file = None
def parse(arg): 'Convert a series of zero or more numbers to an argument tuple' return tuple(map(int, arg.split()))
if name == 'main': TurtleShell().cmdloop()
Aquí hay una sesión de muestra con la turle shell mostrando las funciones de ayuda, de ayuda, usando líneas en blanco para repetir comandos, un registro simple y facilidad de reproducción:
Welcome to the turtle shell. Type help or ? to list commands.
(turtle) ?
Documented commands (type help
(turtle) help forward Move the turtle forward by the specified distance: FORWARD 10 (turtle) record spiral.cmd (turtle) position Current position is 0 0
(turtle) heading Current heading is 0
(turtle) reset (turtle) circle 20 (turtle) right 30 (turtle) circle 40 (turtle) right 30 (turtle) circle 60 (turtle) right 30 (turtle) circle 80 (turtle) right 30 (turtle) circle 100 (turtle) right 30 (turtle) circle 120 (turtle) right 30 (turtle) circle 120 (turtle) heading Current heading is 180
(turtle) forward 100 (turtle) (turtle) right 90 (turtle) forward 100 (turtle) (turtle) right 90 (turtle) forward 400 (turtle) right 90 (turtle) forward 500 (turtle) right 90 (turtle) forward 400 (turtle) right 90 (turtle) forward 300 (turtle) playback spiral.cmd Current position is 0 0
Current heading is 0
Current heading is 180
(turtle) bye Thank you for using Turtle